Columbia Colombia thermal reflection and warm -drying underwear actual test sharing

In recent years, in the winter, there is a wave of warming inner clothing. All manufacturers have risen a hot battle in the cold winter, but when it comes to keeping warm inner clothes, many advertisements are inevitable. Supermarkets, affordable clothing, even roadside stalls, night markets, all jump down to grab money. As for whether it is real or wig fever? Or it is unknown to heat up and sweat.

Columbia哥伦比亚热能反射保暖速干内衣实际测试分享

You may ask, what about the warm inner clothes of outdoor brands? Since the price is three times or even above the price brand, is it so amazing? Or another gimmick? This should be taken down, so I will tell you.

Columbia哥伦比亚热能反射保暖速干内衣实际测试分享

Classification of warm inner clothes

The ancestor of the warm inner clothes, or the most often exposed to things, was called sanitary jackets and sanitary pants when they were young. Most of the traditional sanitary jackets are cotton. Although it can keep warm, it is thick and heavy.

Once

It is difficult to dry quickly. As for the better warmth effect, the material is upgraded to wool, but unless it is extremely advanced wool, it is easy to have

Itching

And wool sanitary jackets are significantly high in price.

With the advancement of chemical fiber fabric technology, most of these warm inner clothes are used for chemical fiber, or some are partially spinked with wool. Because of the active development of various new materials and new weaving methods, the changes in chemical fiber and warm fabrics are also changing.

The advancement of fabrics and the actual needs of the environment and outdoor sports types, the heating inner layers of clothes are divided into different types, and it can usually be roughly divided into three types according to thickness, namely thin, general, and thick. The thin and general types are mainly used by the fabric itself or the additional technology function. As for the thick type, in addition to the thick fabric, even the inner layer also has fine velvet bristles to increase warmth.

In terms of the actual use of the outdoor environment, the thin type belongs to the autumn and winter sports model, which is used to use high exercise, so sweating and fast dryness are better. In addition, it is easy to carry it without causing weight burden. But if it is only used for static activities, it is only suitable for the autumn to early winter or low altitude environment. The general type belongs to the medium -altitude sports model. It still has good sweating and fast dryness. It is suitable for wearing in winter. However, it is necessary to match other middle clothes and outer clothes in high altitude or cold areas. As for the thick type, it is mainly used for static activities, such as winter viewing, and if it is worn with high activity, it must be the severe cold environment. Of course, although the thick inner layer is strong, it is more bloated and bulky.

Left: The thick inner layer of the thickness usually has a fleece in the inner layer, and the thickness of the fabric is also thicker. Right: The thickness of the general type of fabric is in the middle of thick and thin. Like Columbia, it also uses a three -dimensional weaving method to create a separated gap and increase the heat preservation effect.

Columbia Omni-Heat Thermal reflection of thermal reflection of warm and dry underwear

After understanding the classification of warm inner layers, then Columbia Omni-Heat thermal reflects warm-saving dry underwear and pants? The answer is a thin sports model. Therefore, in terms of product positioning, this inner layer of clothes belongs to autumn ~ early winter sports wear, or mid -layer clothes to be used in mid -layer clothes, and therefore analyzes its characteristics.

Keep warm VS sweat and dry fast

At present, the inner layer clothing fabric on the market is mainly based on the two categories: heat storage (temperature) and wind resistance. As for the Omni-Heat of Columbia The biggest advantage of the method on the inner clothing is that it can be equipped with high -quality sweat absorption and fast drying function, but it does not have the effect of keeping warm. It is more important to make the clothing lighter.

Columbia哥伦比亚热能反射保暖速干内衣实际测试分享

The traditional inner layer of clothing keeps warm from the cloth fever (temperature), so the thicker the fabric, the more warm, but the problem of its extension is that it is even more bulky, and it will be slower after the sweat is sucking. However, the aluminum dot reflection with Omni-Heat can reflect the thermal energy from the human body and increase the temperature increase effect by 20%, so the fabric can use a thinner style. In this way, it produced during exercise

Columbia哥伦比亚热能反射保暖速干内衣实际测试分享

Sweat

Sweat can be adsorbed faster and dry, so that the body can maintain a relatively dry state, and it will not cause the inner layer of clothes to be wet after exercise and make people easy to cool.

When you look at it from the packaging, you will clearly emphasize the power of Omni-Heat.

Columbia哥伦比亚热能反射保暖速干内衣实际测试分享

Although the fabric is slightly thicker than the summer sweats, the water still spreads quickly after dripping.

Internal clothing tailoring design and material analysis

This inner layer of pants use a three -dimensional tailoring on the tailoring, whether the top is on both sides of the trunk or connecting the sleeve (about underarms); the pants are under yin and crossing, and the three -dimensional nature of the human body, as well as exercise, and exercise Time ductility. In other words, it can be found that this suit cannot be flat at the above -mentioned parts, but it can maintain a considerable sense of admission after putting it on.

On the fabric, these two pieces of clothes are made of hygroscopic and fast dry materials, but if the inside surface is turned over, for areas that are prone to sweating, such as the underarms of the top and the lower part of the pants, the Omni-Heat reflection is not printed with Aluminum dots make sweat easier to be adsorbed and excreted. In addition, after practical and careful observation, I found that the fabric of the pants is slightly higher than the weaving density than the top, which makes the warmth of the pants slightly higher than that of the top, which can also reduce the cold wind from outer pants (shorts). sense.

Finally, in order to consider sports, in addition to moisture absorption and warmth, fabrics are in terms of elasticity for comprehensiveness, and at the same time have four -way elasticity, so that no matter which stretch or reversal, it will not feel awkward.

The fine aluminum reflection point can increase the effect of body temperature feedback and improve the warmth.

The whole clothes are not all of Omni-Heat printing, and in areas that are prone to sweaty are not printed with aluminum reflection points, and it can be found that there are obvious wrinkles under the armpit, which means three-dimensional tailoring and more in line with exercise needs.

Left: The pants are also made of three -dimensional tailoring. Right: Also on Omni-Heat’s printing, there are also some places where there is no printing.

Columbia哥伦比亚热能反射保暖速干内衣实际测试分享

As soon as the pants were stretched, Omni-Heat’s aluminum reflex points were clearly seen.

Autumn and winter roads (off -road) running, lightweight hiking

Overall, this set of Omni-HEAT warm inner layers of clothes, because the skin touch is quite good, and the function of both hygroscopic sweats and warmth, so it is very suitable for lightweight outdoor sports in autumn today, such as the road of morning and dusk Wild running, or lightweight hiking below 1500 meters above sea level.

However, it should be noted that the better skin touch often means that the fabric is woven with fine yarn, so when hiking at low and medium altitudes, you still need to be careful of branches and thorns, otherwise it will cause hook yarn, although this will not be this not. It affects the function of keeping warm or hygroscopic sweating, but it always looks very distressed.

Columbia哥伦比亚热能反射保暖速干内衣实际测试分享

Finally, if you go to the medium and high altitude areas above 2500 meters, you can also wear it directly after the body is warm or not afraid of cold, but after arriving at the camp or mountain house, you still need to add an extra trench coat or thin coat. So as not to blow the cold wind after sweating, so that the body temperature decreases rapidly, but it is easy to cool.

This inner layer is also very suitable for off -road running and hiking, but you must pay attention to the sharp branches along the road to avoid breaking the clothes

You may also like...

Popular Posts