What kind of float is a good floating, in fact, you can know these three points
What kind of float is a good float? Is the price that is more expensive, the better? In fact, the answer is simple, with high intensity and high concentricity, which is a good float.
The concentricity is highly understood, because the floating body is slender. After the water is entered, the more the concentricity is affected by the water resistance and the dragging of the lead pendant. So, what is strong?
The intensity of floating floats is affected by three factors, which are materials, craftsmanship, and paint. In the case of no problem in concentric, as long as the materials, craftsmanship, and paint are no problem, then the price of floats can be high or low, which can be low or low. It can be regarded as a good float, so how to distinguish the materials, craftsmanship, and paint of floating floats?
1. Floating materials
The float consists of three parts, namely drift tails, drift belly, drifting feet, and drifting tail materials, either glass fiber, cooked glue and glass fiber, and a polycarbonate material.
The belly has a shell reed, a peacock feather, a Balt shirt wood, and a foam plastic. There are four types of carbon fiber, glass fiber, carbonized bamboo feet, and steel drifting feet.
The price of floats is very large, which is determined by the float material, such as peacock feathers and floating reeds with shelling reeds. Theoretically production costs will be higher.
The plasticity of foam plastic and Balt shirt wood is very high, and the source is also very wide, so the production cost is relatively low. If the price of the brand premium is left, the price of the float is sorted in order. plastic.
However, in terms of intensity, this sort is reversed again. The reason why it is because of the float of different materials and the production process is different.
Second, the manufacturing process of float
The feathers drift and reed drift, you need to make the petals wrap the belly first. After the drifting belly is successfully made, insert the drifting and drift tails separately, and then lock the shoulders and lock your feet.
The Balzon wood and foam plastic are made of plasticity, so the intensity will be slightly higher. Speaking of which, I have to mention concentric.
Feather drift and reed drift, after split flaps, need plasticity. In the process of shaping, if it is not made by a master, it will easily cause the floating concentric to deviate slightly.
Relatively speaking, the bias of the concentricity of a plastic -shaped Balt shirt and foam plastic material often appear when locking the feet and drifting tails.
Of course, the production steps of floats are definitely not a few simple words, but the floating floats with good craftsmanship will almost not have bursting and explosive feet.
To put it simply, when the float is damaged, the drift tails and feet are cracking from the drifting shoulders of the belly and the belly and feet, and the floating floats with good craftsmanship will hardly occur.
Third, floating paint surface treatment
The paint surface of the float often knows its advantages and disadvantages after use, and the good paint surface is not only cleaned, clear, and beautiful, but also double the strength of the float.
Under normal circumstances, the rinse of the belly, the position of the belly and the belly, and the position of the stomach will be wrapped and painted. The paint surface is well treated, and the overall belly is round and smooth.
Conversely, the shoulders and feet of the belly have obvious bumps, and there will even be a bit of air bubbles. It has obvious foreign body feel with fingers, so the possibility of bursting and explosive feet is very high.
In actual combat, no matter what kind of floating floats, as long as the core essence of the core and good intensity, it can basically be regarded as a good float. As for the length of eating lead geometry, drifting feet, and drifting tails, this is how to use it.